La entrada GENERAL WORK 250/1000 aparece primero en Sima.

La entrada GENERAL WORK 115/230 aparece primero en Sima.

Power and Precision in Every Cut

Take your finishes to the next level with a tool designed for excellence. Thanks to the combination of a robust chassis and an advanced guiding system, this machine ensures perfect results even on high-hardness ceramics, eliminating annoying play and vibrations.

Key Features:

• High-Stability Guiding: Equipped with a 6-bearing system (2 at 90° and 4 in V), providing smooth and linear travel while keeping the blade trajectory perfectly stable.

• High-Efficiency Motor: Features IE3 motor technology, complying with European regulations. Achieve maximum cutting performance with lower energy consumption.

• Ergonomic and Safe Design: Ergonomic handles provide full control over the cutting head, reducing physical strain during long workdays.

• Simplified Maintenance: Removable bed slats allow for deep and quick cleaning after use, extending the machine’s lifespan.

Effortless Logistics and Transport

We know time is money on-site. That’s why this cutter features a foldable leg system and transport wheels, allowing a single operator to move, load, and store it efficiently.

Optional Accessories:

1. Class II Precision Laser: Projects a clear guide line for instant, millimeter-perfect alignment.

2. Side Extension Table: Expands the support surface for large-format tiles, featuring telescopic legs for perfect leveling.

La entrada PERLA 250 1000 / 1300 aparece primero en Sima.

The New DEL 25

• Semi-portable: 90 kgs.
• Silent, driven by a high-efficiency inverter.
• Rugged, protected inside against iron particles and humidity.
• “Squirrel cage” motor, solid and durable.
• Low maintenance (no springs, chains, brushes or clutch). Can be cleaned with compress air.
• Movement regulation by inductive sensor.
• Safety pedal, no accidental backlash
• Wiring reinforced with metal mesh.
• Gear box lubricated at all times (with oil, not grease).
• Bending angles of up to 225º
• Bending Pin and mandrels group integrated into a specific housing of the machine itself.
• Protective ring, minimizing the friction of the reinforcing bar with the table.
• …And, as an option, legs and wheels

La entrada DEL 25 aparece primero en Sima.

What does Tronic do? 

• Wireless connection to smartphone, tablet, computer or industrial screen.
• 10 programmable sequences of bending angles with 10 memories each.
• Locking timer by usage time or by date.
• Counter of bended rebars, time connected and time of operation (total and partial).
• Can operate on either automatic (TRONIC) or manual mode.
• Selective access to designated users with password for restricted fuctions.
• Test mode to check main functions (pedal, emergency and reverse buttons, limit switch at front panel, table and COMBI shearing jaw, and 3
  inductive sensors).

La entrada DEL TRONIC aparece primero en Sima.

• The new Triton crushes the debrisgenerated during refurbishing work,reducing by 1/3 its original volumen.
• Easy stack up and removal of the crushed debris (aggregate).
• If the aggregate is from crushed free of gypsum, metal and wood, it can be re-used for mixing new mortar.

Portable

• Build on four wheels (puncture free), it fits a domestic lift and through a house or apartment door.

Versatile

• Two sieves (included) to obtain the desired sand gange.
• Three-Phase and Single-phase versions (this last one fitted with inverter), fully compatible with the domestic electric supply.

Triple Savings

• Saving s in space. The aggregate obtained has 1/3 of the volume of the original debris.
• Saving in time. Less time / workforce needed than for ordinary debris removal.
• Saving in recyclability. The sand from crushed debris can be used for making mortar or concrete, instead of buying new aggregate.

La entrada TRITÓN aparece primero en Sima.

• 1,5 kW motor.
• Different anchoring systems to hold the tiles still while cutting.
• Removable bench (no tools needed).
• Folding legs with wheels.
• Can cut straight at 90º up to 45º (bevel).
• Diagonal cuts.
• Stop ruler.
• Rugged aluminium chassis.
• Pulley wheel to operate cutting feed.

La entrada KERAMAX aparece primero en Sima.

• 40 x 40 x 3 mm in RIG 3 (1.6” x 1.6” x 0.11”).
• 50 x 50 x 3 mm in RIG 5 (1.6” x 1.6” x 0.11”).
• Self adjusting wheels.
• Featured with a drill bit centering device.
• Tipping safe system in the base and the wheels.
• Prepared to use vacuum pump (only RIG 3).

La entrada COLUMN RIG 5 aparece primero en Sima.

For cutting natural stone: granite, basalt, quartz, silica, silestone, etc.

La entrada Granite – High Performance aparece primero en Sima.

Professional use of marble especialists and builders.

Not suitable for other materials.

La entrada Marble Electroplated aparece primero en Sima.