The New DEL 25

• Semi-portable: 90 kgs.
• Silent, driven by a high-efficiency inverter.
• Rugged, protected inside against iron particles and humidity.
• “Squirrel cage” motor, solid and durable.
• Low maintenance (no springs, chains, brushes or clutch). Can be cleaned with compress air.
• Movement regulation by inductive sensor.
• Safety pedal, no accidental backlash
• Wiring reinforced with metal mesh.
• Gear box lubricated at all times (with oil, not grease).
• Bending angles of up to 225º
• Bending Pin and mandrels group integrated into a specific housing of the machine itself.
• Protective ring, minimizing the friction of the reinforcing bar with the table.
• …And, as an option, legs and wheels

La entrada DEL 25 aparece primero en Sima.

What does Tronic do? 

• Wireless connection to smartphone, tablet, computer or industrial screen.
• 10 programmable sequences of bending angles with 10 memories each.
• Locking timer by usage time or by date.
• Counter of bended rebars, time connected and time of operation (total and partial).
• Can operate on either automatic (TRONIC) or manual mode.
• Selective access to designated users with password for restricted fuctions.
• Test mode to check main functions (pedal, emergency and reverse buttons, limit switch at front panel, table and COMBI shearing jaw, and 3
  inductive sensors).

La entrada DEL TRONIC aparece primero en Sima.

Supplied with the necessary pins, rollers and mandrels to produce the desired bending angle.

All models of DEL benders are also capable to produce stirrups, spirals and hoops using the optional accessories.

Easy low-cost maintenance can be even performed on site by the machine operator.

A single-phase 230V inverter version is available for model DEL 32. This machine operates without needing a three-phase electric supply. It aligns perfectly with the single-phase CEL 36 P rebar shear in medium scope rebar works.

All DEL benders are fitted with the compulsory safety systems and devices to comply with all international safety regulations:

• Mechanical safety devices: Automatic stop when frontal panel door opens or when the upper transparent polycarbonate shield is lifted.
• Electrical safety devices: Fully hermetic control panel, with right/left turn selector, voltage and amperage display and magneto-thermal protection breaker switch.
• Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
• Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
• Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for “Z” shaped figures (bottle neck shapes).
• Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

La entrada DEL – 32 aparece primero en Sima.

Four models available to meet any rebar production requirements in both, job sites and rebar factories / workshops.

Supplied with the necessary pins, rollers and mandrels to produce the desired bending angle.

All models of DEL benders are also capable to produce stirrups, spirals and hoops using the optional accessories.

Easy low-cost maintenance can be even performed on site by the machine operator.

A single-phase 230V inverter version is available for model DEL 32. This machine operates without needing a three-phase electric supply. It aligns perfectly with the single-phase CEL 36 P rebar shear in medium scope rebar works.

All DEL benders are fitted with the compulsory safety systems and devices to comply with all international safety regulations:

• Mechanical safety devices: Automatic stop when frontal panel door opens or when the upper transparent polycarbonate shield is lifted.
• Electrical safety devices: Fully hermetic control panel, with right/left turn selector, voltage and amperage display and magneto-thermal protection breaker switch.
• Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
• Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
• Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for “Z” shaped figures (bottle neck shapes).
• Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

La entrada DEL – 32 2V aparece primero en Sima.

Four models available to meet any rebar production requirements in both, job sites and rebar factories / workshops.

Supplied with the necessary pins, rollers and mandrels to produce the desired bending angle.

All models of DEL benders are also capable to produce stirrups, spirals and hoops using the optional accessories.

Easy low-cost maintenance can be even performed on site by the machine operator.

A single-phase 230V inverter version is available for model DEL 32. This machine operates without needing a three-phase electric supply. It aligns perfectly with the single-phase CEL 36 P rebar shear in medium scope rebar works.

All DEL benders are fitted with the compulsory safety systems and devices to comply with all international safety regulations:

• Mechanical safety devices: Automatic stop when frontal panel door opens or when the upper transparent polycarbonate shield is lifted.
• Electrical safety devices: Fully hermetic control panel, with right/left turn selector, voltage and amperage display and magneto-thermal protection breaker switch.
• Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
• Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
• Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for “Z” shaped figures (bottle neck shapes).
• Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

La entrada DEL – 36 aparece primero en Sima.

Four models available to meet any rebar production requirements in both, job sites and rebar factories / workshops.

Supplied with the necessary pins, rollers and mandrels to produce the desired bending angle.

All models of DEL benders are also capable to produce stirrups, spirals and hoops using the optional accessories.

Easy low-cost maintenance can be even performed on site by the machine operator.

A single-phase 230V inverter version is available for model DEL 32. This machine operates without needing a three-phase electric supply. It aligns perfectly with the single-phase CEL 36 P rebar shear in medium scope rebar works.

All DEL benders are fitted with the compulsory safety systems and devices to comply with all international safety regulations:

• Mechanical safety devices: Automatic stop when frontal panel door opens or when the upper transparent polycarbonate shield is lifted.
• Electrical safety devices: Fully hermetic control panel, with right/left turn selector, voltage and amperage display and magneto-thermal protection breaker switch.
• Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
• Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
• Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for “Z” shaped figures (bottle neck shapes).
• Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

La entrada DEL – 36 2V aparece primero en Sima.

Four models available to meet any rebar production requirements in both, job sites and rebar factories / workshops.

Supplied with the necessary pins, rollers and mandrels to produce the desired bending angle.

All models of DEL benders are also capable to produce stirrups, spirals and hoops using the optional accessories.

Easy low-cost maintenance can be even performed on site by the machine operator.

A single-phase 230V inverter version is available for model DEL 32. This machine operates without needing a three-phase electric supply. It aligns perfectly with the single-phase CEL 36 P rebar shear in medium scope rebar works.

All DEL benders are fitted with the compulsory safety systems and devices to comply with all international safety regulations:

• Mechanical safety devices: Automatic stop when frontal panel door opens or when the upper transparent polycarbonate shield is lifted.
• Electrical safety devices: Fully hermetic control panel, with right/left turn selector, voltage and amperage display and magneto-thermal protection breaker switch.
• Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
• Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
• Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for “Z” shaped figures (bottle neck shapes).
• Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

La entrada DEL – 45 aparece primero en Sima.

Four models available to meet any rebar production requirements in both, job sites and rebar factories / workshops.

Supplied with the necessary pins, rollers and mandrels to produce the desired bending angle.

All models of DEL benders are also capable to produce stirrups, spirals and hoops using the optional accessories.

Easy low-cost maintenance can be even performed on site by the machine operator.

A single-phase 230V inverter version is available for model DEL 32. This machine operates without needing a three-phase electric supply. It aligns perfectly with the single-phase CEL 36 P rebar shear in medium scope rebar works.

All DEL benders are fitted with the compulsory safety systems and devices to comply with all international safety regulations:

• Mechanical safety devices: Automatic stop when frontal panel door opens or when the upper transparent polycarbonate shield is lifted.
• Electrical safety devices: Fully hermetic control panel, with right/left turn selector, voltage and amperage display and magneto-thermal protection breaker switch.
• Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
• Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
• Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for “Z” shaped figures (bottle neck shapes).
• Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

La entrada DEL – 45 2V aparece primero en Sima.

Four models available to meet any rebar production requirements in both, job sites and rebar factories / workshops.

Supplied with the necessary pins, rollers and mandrels to produce the desired bending angle.

All models of DEL benders are also capable to produce stirrups, spirals and hoops using the optional accessories.

Easy low-cost maintenance can be even performed on site by the machine operator.

A single-phase 230V inverter version is available for model DEL 32. This machine operates without needing a three-phase electric supply. It aligns perfectly with the single-phase CEL 36 P rebar shear in medium scope rebar works.

All DEL benders are fitted with the compulsory safety systems and devices to comply with all international safety regulations:

• Mechanical safety devices: Automatic stop when frontal panel door opens or when the upper transparent polycarbonate shield is lifted.
• Electrical safety devices: Fully hermetic control panel, with right/left turn selector, voltage and amperage display and magneto-thermal protection breaker switch.
• Precise angle adjustment through pins and inductive sensors, dirt and water proof, much more reliable than standard limit switches.
• Side short rulers with holes for pins, allowing an accurate tuning on angle adjustment (models DEL 32 and DEL 36).
• Models DEL 45 and DEL 52 featured with side long rulers which allows double bends for “Z” shaped figures (bottle neck shapes).
• Two speeds motor available upon request on models DEL 32, DEL 36 and DEL 45.

La entrada DEL – 52 aparece primero en Sima.