Thanks to its very innovative design, the COBRA 30 PRO is a fast, lightweight and easy to handle pavement cutter. It can work on discs of:

• Ø300 mm (12”)
• Ø350mm (14”)
• Ø400 mm (16”)

And it also helps reducing not only the number of maintenance operations, but also the time that these operations usually take: easy and quick access to the belts, which do not need alignment when tighten.

The new roller tightening system makes this operation a matter of five minutes (instead of the 32 minutes that averages the tightening in conventional pavement cutters).

All this translates into a considerable money saving. The innovation goes even further. The transmission motor to shaft system placed with the cutting blade on the same side of the machine improves performance, while the Poly-V belt makes the most of the driving power with a reduced tensile strength. All to an improved efficiency and a longer life for the machine.

The deepest cut:

• Light and portable, for easy transportation even in small vehicles.
• Folding handlebars. Once folded, the machine size is very convenient for storing.
• Rugged and quick: perfect for rental companies. 
• Depth regulation through pneumatic gas shock absorber, with height locking system.
• Rear axe adjustable sidewise, allowing cuts close to walls or sidewalk kerbs, columns, etc.
• Wheels bearings protected from pressure water, when washing the machine, by hubcups on both sides of the wheels. This protection extends the bearingslife.
• Portable polycarbonate water tank (removable).
• Puncture proof rear wheels.

La entrada COBRA 30 PRO aparece primero en Sima.

Thanks to its very innovative design, the COBRA 35 PRO is a fast, lightweight and easy to handle pavement cutter. It can work on discs of:

• Ø300 mm (12”)
• Ø350mm (14”)
• Ø400 mm (16”)

And it also helps reducing not only the number of maintenance operations, but also the time that these operations usually take: easy and quick access to the belts, which do not need alignment when tighten.

The new roller tightening system makes this operation a matter of five minutes (instead of the 32 minutes that averages the tightening in conventional pavement cutters).

All this translates into a considerable money saving. The innovation goes even further. The transmission motor to shaft system placed with the cutting blade on the same side of the machine improves performance, while the Poly-V belt makes the most of the driving power with a reduced tensile strength. All to an improved efficiency and a longer life for the machine.

The deepest cut:

• Light and portable, for easy transportation even in small vehicles.
• Folding handlebars. Once folded, the machine size is very convenient for storing.
• Rugged and quick: perfect for rental companies. 
• Depth regulation through pneumatic gas shock absorber, with height locking system.
• Rear axe adjustable sidewise, allowing cuts close to walls or sidewalk kerbs, columns, etc.
• Wheels bearings protected from pressure water, when washing the machine, by hubcups on both sides of the wheels. This protection extends the bearingslife.
• Portable polycarbonate water tank (removable).
• Puncture proof rear wheels.

La entrada COBRA 35 PRO aparece primero en Sima.

The COBRA Mekano is a fast and all-round pavement cutting machine, lightweight and easy to handle, which can operate with blades from Ø350 mm (14″) up to Ø500 mm (20″) size. Its innovative design allows a relevant reduction of both, the number of maintenance services and the time spent of each maintenance, which is 80% below as compared to any other conventional cutter. This obviously means a considerable reduction in maintenance costs.

For this reason, it is a very convenient machine for rentals. As in COBRA 30 / 35 PRO, the height adjustment is performed with a pneumatic gas shock absorber operated from a trigger in the handlebar.

Likewise, the transmission is efficiently performed by a Poly-V belt. This belt has a better grip and resistance and does not need to operate as tight as a conventional A or B type V-belt.

Lightweight and Nimble:

• Both the 40 and 50 models are designed to use bigger diamond blades.
• The COBRA 40 Mekano can operate with Ø350 mm (14”) and Ø400 mm (16”) blades, reaching up to 132 mm ( 5.2”) cutting depth.
• The COBRA Mekano 50 can operate with Ø450 mm (18”) and Ø500 mm (20”) blades, which reach a maximum cutting depth of up to 182 mm (7.1”).
• Strong and long lasting, with an improved motor performance and a smoother running.
• A variety of motors are available for both models, up to 14 Hp and with the possibility of a cyclone air filter motor.

La entrada COBRA 40 MEKANO aparece primero en Sima.

The COBRA Mekano is a fast and all-round pavement cutting machine, lightweight and easy to handle, which can operate with blades from Ø350 mm (14″) up to Ø500 mm (20″) size. Its innovative design allows a relevant reduction of both, the number of maintenance services and the time spent of each maintenance, which is 80% below as compared to any other conventional cutter. This obviously means a considerable reduction in maintenance costs.

For this reason, it is a very convenient machine for rentals. As in COBRA 30 / 35 PRO, the height adjustment is performed with a pneumatic gas shock absorber operated from a trigger in the handlebar.

Likewise, the transmission is efficiently performed by a Poly-V belt. This belt has a better grip and resistance and does not need to operate as tight as a conventional A or B type V-belt.

Lightweight and Nimble:

• Both the 40 and 50 models are designed to use bigger diamond blades.
• The COBRA 40 Mekano can operate with Ø350 mm (14″) and Ø400 mm (16″) blades, reaching up to 132 mm ( 5.2″) cutting depth. The COBRA Mekano 50 can operate with Ø450 mm (18″) and Ø500 mm (20″) blades, which reach a maximum cutting depth of up to 182 mm (7.1″).
• Strong and long lasting, with an improved motor performance and a smoother running.
• A variety of motors are available for both models, up to 14 Hp and with the possibility of a cyclone air filter motor.

La entrada COBRA 50 MEKANO aparece primero en Sima.

COBRA 60 includes a polypropylene water tank of  50 litres (13.2 gal.).

Though very robust, the design is ergonomic to provide an easy use and to ensure unbeatable performance in large areas such as motorways, roads, industrial buildings, airports, etc.

Great performance and versatility: 

• Depth indicator.
• Two ways blade cooling system, either from the built-in water tank or the water mains.
• Mechanical hand wheel operated (COBRA 60).
• Cutting adjustment by handle with locking system.
• Cutting depth control by trapezoidal thread shaft on a cast iron housing mounted gear.
• Especially designed for heavy duty, including rental works.
• Easy access to the blade.

La entrada COBRA 60 aparece primero en Sima.

• Ø350 mm (14”) or Ø400 mm (16”)
• Ø450 mm (18”) or Ø500 mm (20”).

The distance between the two blades can be adjusted to 60 cm, 65 cm. and 70 cm. (24”, 26” and 28”).

It is a very rugged and all-round machine, improved for heavy duty works always performing with precision and reliability.

It can also be operated as a conventional cutter, with the blade placed on either sides. Besides, the TRENCHER can also be adapted, with the optional accessories needed, to perform two very
close parallel cuts of 5 cm, 8 cm or 10 cm wide.

Two parallel cuts just in one go:

• Ø500 mm (20”) blade guards available as optional. (Only for versions Honda 23Hp, Kohler 18Hp and Lombardini 16Hp).
• Two blade guards.
• Two water tanks.
• It can cut with just one blade, either on the right or the left side.
• Locking system of cutting depth.
• Cyclone air filter 13Hp Honda motor version.
• Oil level dipstick and oil drain plug.
• Parking brake.
• Hubcups at front and rear wheels to protect the bearings.

La entrada TRENCHER 60/70 aparece primero en Sima.

It makes parallel cuts of 5 cm and 10 cm in a single pass !!! increase your productivity and profitability per hour of work.

Save time and effort with the SIMA Cobra 45 VARIO Pavement Cutter

SIMA Cobra 45 VARIO Pavement Cutter: Power and Precision

La entrada COBRA 45 VARIO aparece primero en Sima.

The SIMA Cobra 45 PRO is designed for maximum durability and performance with its robust construction and high quality materials. Its water cooling system ensures continuous and prolonged use without overheating. In addition, its adjustable handlebar allows you to work comfortably in different positions.

With the SIMA Cobra 45 PRO Pavement Cutter, you can achieve precise and uniform cuts on any construction site, whether it’s for creating expansion joints, pipe and cable installations, or any other application that requires a clean and efficient cut.

La entrada COBRA 45 PRO aparece primero en Sima.