They are prepared to cut any kind of blocks, such as pre-cast concrete, poroton, gasbeton or terracotta, but also for many other construction materials:

• bricks
• terrazzo
• limestone
• sandstone
• kerbstones.

Made to last: aluminium body and galvanized steel water tub, providing higher resistance to oxidation.

The BALI 700 series can use:

• Ø600
• Ø650
• Ø700 mm blades (24”, 25” and 27”), delivering up to 270 mm deep cuts in one pass.

The BALI 700 series deliver a lighter and portable choice for large blocks cutting. They are available both in three-phase and single-phase versions, allowing these last ones their connection to a standard power supply.

The versatile and rugged block cutter:

• Its reduced size makes it easy to store.
• Anodized extruded aluminium body, durable and lighter for transportation and to move the machine at the job site.
• Galvanized steel basin to prevent oxidation.
• Deep cutting, ranging from 20 cm (7.8”) in BALI 500 to 35 cm. (14”) in BALI 700.
• The head can be easily adjusted in height to adapt to the different cutting depths needed.
• Low vibrations and extended blade performance when cutting, due to its robustness.
• Excellent machine for cutting the most common sizes of blocks.

La entrada BALI 700 Mekano aparece primero en Sima.

• from 700 mm (27.5”) cutting lengh to 1000 mm (39.3”)
• and a different cutting depth upon the use of a Ø200 mm (8”) or a Ø230 / Ø250 mm (9” / 10”) diamond blade adjusting the head height.

It is both, rugged and lightweight, as it is built on an aluminium frame and other rust-free materials. The cut is always thin and accurate.

The PERLANATO range is versatile, practical, highly performant and durable. They are perfect for cutting large slabs of hard porcelanic gres. All models have folding legs, and wheels are optionally available. Also as an option, they can be complemented with a side support with two clamps to lock the piece to the bench, for a more precise cut.

Efficient solutions:

• The PERLANATO range offers fast, reliable and efficient solutions, performing the two basic functions that the tile fitter needs on the work site: a 90º and 45º fine cut.
• The combination of its 1.5 Hp engine and the blade diameter (up to 250 mm / 10”), allows cutting all kind of materials up to 63 mm (2.4”) high:

1. hard tiles
2. terrazzo
3. terracotta brick
4. marble
5. gres, etc.

• All PERLANATO models are delivered with a tile cutting diamond blade included.
• The water supply hose pipe and wires are placed and lock so they never disturb the cutting field, but maintaining the necessary flexibility.
• As in all SIMA cutting tables, the locknuts that fix the blade guard to the head are tied to the guard, to avoid being lost.

La entrada PERLANATO 200 700 aparece primero en Sima.

They are prepared to cut any kind of blocks, such as pre-cast concrete, poroton, gasbeton or terracotta, but also for many other construction materials:

• bricks
• terrazzo
• limestone
• sandstone
• kerbstones.

Made to last: aluminium body and galvanized steel water tub, providing higher resistance to oxidation.

The BALI 500 series can use:

• Ø400
• Ø450
• Ø500 mm blades (16”, 18” and 20”), delivering up to 200 mm (7.8”) deep cuts in one pass.

The versatile and rugged block cutter:

• Its reduced size makes it easy to store.
• Anodized extruded aluminium body, durable and lighter for transportation and to move the machine at the job site.
• Galvanized steel basin to prevent oxidation.
• Deep cutting, ranging from 20 cm (7.8”) in BALI 500 to 35 cm. (14”) in BALI 700.
• The head can be easily adjusted in height to adapt to the different cutting depths needed.
• Low vibrations and extended blade performance when cutting, due to its robustness.
• Excellent machine for cutting the most common sizes of blocks.

La entrada BALI 500 Mekano aparece primero en Sima.

• bricks
• tiles
• kerbstones
• granite
• marble
• roof tiles, etc.

They offer top performance at the job site, cutting pieces up to 650 mm (25”) long.

The models DAKAR Mekano and DAKAR 400 Mekano have removable legs, but they can be optionally fitted with folding legs and transport wheels.

The DAKAR Mekano 45 shares the capacities and cutting accuracy of all DAKAR models, but it adds
the possibility of performing 45º bevel cuts, as well as to swinging the cutting head to the desired depth of cutting. Extremely versatile, its cutting length can be modified as well, by moving the head arm alongside the frame, to best adapt to the cutting distance

It is 90% made of stainless materials. The remaining 10% is coated with an anti-rust epoxy-polyester paint. The legs and head are removable making it easier to transport and move the machine on site.

Therefore, it is very easy to handle, facilitating the operator task and reducing the operation time.

90º and 45º cuts in large size pieces:

• Excellent value for money.
• Available in single-phase versions (3 Hp) and three-phase versions (4 Hp), to match every need.
• Adjustable height (DAKAR MK 45) to allow cutting different thickness using the appropriate blade.
• Maximum cutting depth is 75 mm (3”) for Ø300 mm (12”) blade and 100 mm (4”) for Ø350 blade (14”).
• All DAKAR models are supplied with a diamond blade included

La entrada DAKAR MEKANO aparece primero en Sima.

• from 700 mm (27.5”) cutting lengh to 1000 mm (39.3”)
• and a different cutting depth upon the use of a Ø200 mm (8”) or a Ø230 / Ø250 mm (9” / 10”) diamond blade adjusting the head height.

It is both, rugged and lightweight, as it is built on an aluminium frame and other rust-free materials. The cut is always thin and accurate.

The PERLANATO range is versatile, practical, highly performant and durable. They are perfect for cutting large slabs of hard porcelanic gres. All models have folding legs, and wheels are optionally available. Also as an option, they can be complemented with a side support with two clamps to lock the piece to the bench, for a more precise cut.

Efficient solutions:

• The PERLANATO range offers fast, reliable and efficient solutions, performing the two basic functions that the tile fitter needs on the work site: a 90º and 45º fine cut.
• The combination of its 1.5 Hp engine and the blade diameter (up to 250 mm / 10”), allows cutting all kind of materials up to 63 mm (2.4”) high:

1. hard tiles
2. terrazzo
3. terracotta brick
4. marble
5. gres, etc.

• All PERLANATO models are delivered with a tile cutting diamond blade included.
• The water supply hose pipe and wires are placed and lock so they never disturb the cutting field, but maintaining the necessary flexibility.
• As in all SIMA cutting tables, the locknuts that fix the blade guard to the head are tied to the guard, to avoid being lost.

La entrada PERLANATO 200 1000 aparece primero en Sima.

• from 700 mm (27.5”) cutting lengh to 1000 mm (39.3”)
• and a different cutting depth upon the use of a Ø200 mm (8”) or a Ø230 / Ø250 mm (9” / 10”) diamond blade adjusting the head height.

It is both, rugged and lightweight, as it is built on an aluminium frame and other rust-free materials. The cut is always thin and accurate.

The PERLANATO range is versatile, practical, highly performant and durable. They are perfect for cutting large slabs of hard porcelanic gres. All models have folding legs, and wheels are optionally available. Also as an option, they can be complemented with a side support with two clamps to lock the piece to the bench, for a more precise cut.

Efficient solutions:

• The PERLANATO range offers fast, reliable and efficient solutions, performing the two basic functions that the tile fitter needs on the work site: a 90º and 45º fine cut.
• The combination of its 1.5 Hp engine and the blade diameter (up to 250 mm / 10”), allows cutting all kind of materials up to 63 mm (2.4”) high:

1. hard tiles
2. terrazzo
3. terracotta brick
4. marble
5. gres, etc.

•  All PERLANATO models are delivered with a tile cutting diamond blade included.
• The water supply hose pipe and wires are placed and lock so they never disturb the cutting field, but maintaining the necessary flexibility.
• As in all SIMA cutting tables, the locknuts that fix the blade guard to the head are tied to the guard, to avoid being lost.

La entrada PERLANATO 250 700 aparece primero en Sima.

• bricks
• tiles
• kerbstones
• granite
• marble
• roof tiles, etc.

They offer top performance at the job site, cutting pieces up to 650 mm (25”) long.

The models DAKAR Mekano and DAKAR 400 Mekano have removable legs, but they can be optionally fitted with folding legs and transport wheels.

The DAKAR Mekano 45 shares the capacities and cutting accuracy of all DAKAR models, but it adds
the possibility of performing 45º bevel cuts, as well as to swinging the cutting head to the desired depth of cutting. Extremely versatile, its cutting length can be modified as well, by moving the head arm alongside the frame, to best adapt to the cutting distance

It is 90% made of stainless materials. The remaining 10% is coated with an anti-rust epoxy-polyester paint. The legs and head are removable making it easier to transport and move the machine on site.

Therefore, it is very easy to handle, facilitating the operator task and reducing the operation time.

90º and 45º cuts in large size pieces:

• Excellent value for money.
• Available in single-phase versions (3 Hp) and three-phase versions (4 Hp), to match every need.
• Adjustable height (DAKAR MK 45) to allow cutting different thickness using the appropriate blade.
• Maximum cutting depth is 75 mm (3”) for Ø300 mm (12”) blade and 100 mm (4”) for Ø350 blade (14”).
• All DAKAR models are supplied with a diamond blade included.

La entrada DAKAR 400 MEKANO aparece primero en Sima.

The VENUS Mekano range is conceived to straight or 45º angle cut all kind of construction materials, particularly those of larger size, quickly, precisely and with the highest quality.

Models VENUS 125, 150 and 200 include a handwheel operated feed with a toothed belt transmission. It also includes a self-cleaning system of the sliding rails based on polishing felts and a folding guard in all models. As all Mekano machines, a 90 % of this range is manufactured with stainless materials.

The cutting head moves with the assistance of a bearings system mounted on an aluminium cart. These bearings are placed in 30º and 90º angles, ensuring a perfect straight or bevel cut, essential when cutting high value tiles and ceramics.

Their innovative upper bridge is also made in anodized reinforced aluminium. Fitting the cutting head is very easy and can use:

• Ø300 mm (12”)
• Ø350 mm (14”) blades.

It is the perfect machine to use at the job site and in marble or granite workshops, etc.

SIMA has available an especial VENUS model designed to performs cuts on polyurethane insulating panels. This model is delivered with a TCT blade and is fitted with the protection devices to ensure an easy, safe and fast cut.

La entrada VENUS 85 MEKANO aparece primero en Sima.

The SIMA Dakar Plus 450 is a professional masonry saw designed for high-hardness materials such as concrete, marble, and granite. It features a robust tubular chassis, a single-phase motor, and an adjustable spring-loaded head. Compatible with blades up to Ø450 mm, it allows a maximum cutting height of 148 mm and facilitates transport thanks to its removable legs.

• Materials: Concrete, thermo-clay, marble, and granite.

• Capacity: Cutting height up to 148 mm (blades from Ø350 to Ø450).

• Design: Lightweight tubular chassis with removable legs for easy transport.

• Connection: Single-phase motor compatible with standard electrical grids.

• Cutting: Spring system for controlled descent and height locking.

La entrada DAKAR PLUS 450 aparece primero en Sima.

• from 700 mm (27.5”) cutting lengh to 1000 mm (39.3”)
• and a different cutting depth upon the use of a Ø200 mm (8”) or a Ø230 / Ø250 mm (9” / 10”) diamond blade adjusting the head height.

It is both, rugged and lightweight, as it is built on an aluminium frame and other rust-free materials. The cut is always thin and accurate.

The PERLANATO range is versatile, practical, highly performant and durable. They are perfect for cutting large slabs of hard porcelanic gres. All models have folding legs, and wheels are optionally available. Also as an option, they can be complemented with a side support with two clamps to lock the piece to the bench, for a more precise cut.

Efficient solutions:

• The PERLANATO range offers fast, reliable and efficient solutions, performing the two basic functions that the tile fitter needs on the work site: a 90º and 45º fine cut.
• The combination of its 1.5 Hp engine and the blade diameter (up to 250 mm / 10”), allows cutting all kind of materials up to 63 mm (2.4”) high:

1. hard tiles
2. terrazzo
3. terracotta brick
4. marble
5. gres, etc.

•  All PERLANATO models are delivered with a tile cutting diamond blade included.
• The water supply hose pipe and wires are placed and lock so they never disturb the cutting field, but maintaining the necessary flexibility.
• As in all SIMA cutting tables, the locknuts that fix the blade guard to the head are tied to the guard, to avoid being lost.

La entrada PERLANATO 250 1000 aparece primero en Sima.