Power and Precision in Every Cut

Take your finishes to the next level with a tool designed for excellence. Thanks to the combination of a robust chassis and an advanced guiding system, this machine ensures perfect results even on high-hardness ceramics, eliminating annoying play and vibrations.

Key Features:

• High-Stability Guiding: Equipped with a 6-bearing system (2 at 90° and 4 in V), providing smooth and linear travel while keeping the blade trajectory perfectly stable.

• High-Efficiency Motor: Features IE3 motor technology, complying with European regulations. Achieve maximum cutting performance with lower energy consumption.

• Ergonomic and Safe Design: Ergonomic handles provide full control over the cutting head, reducing physical strain during long workdays.

• Simplified Maintenance: Removable bed slats allow for deep and quick cleaning after use, extending the machine’s lifespan.

Effortless Logistics and Transport

We know time is money on-site. That’s why this cutter features a foldable leg system and transport wheels, allowing a single operator to move, load, and store it efficiently.

Optional Accessories:

1. Class II Precision Laser: Projects a clear guide line for instant, millimeter-perfect alignment.

2. Side Extension Table: Expands the support surface for large-format tiles, featuring telescopic legs for perfect leveling.

La entrada PERLA 250 1000 / 1300 aparece primero en Sima.

• 1,5 kW motor.
• Different anchoring systems to hold the tiles still while cutting.
• Removable bench (no tools needed).
• Folding legs with wheels.
• Can cut straight at 90º up to 45º (bevel).
• Diagonal cuts.
• Stop ruler.
• Rugged aluminium chassis.
• Pulley wheel to operate cutting feed.

La entrada KERAMAX aparece primero en Sima.

The blocks saw MAGNUM 1000 is rugged and powerful. It provides a high performance in cutting large-sized blocks of:

• poroton
• pre-cast concrete
• gasbeton
• lime / sand stone and many other construction materials, always using the blade that better suits the material to cut.

There are two versions available: the 5.5 Kw (7,5 HP) for Ø700 mm (27”) blades and the 7 Kw (10 HP) for Ø1000 mm (39”) blades.

The MAGNUM  includes such improvements as:
1. A new star-delta starter to reduce the amperage intake on start.

• When the start button is pushed, the motor gets started connecting the coils in series (delta mode), making the machine to work at just 80% of the total motor power.
• After 10 seconds, it will automatically switch to full power by connecting the coils in star mode.
• The red button will stop the machine in case of emergency.

2. Heavy duty water pump with high flow of up to 40 litres (10.5 gal.) per minute.
3. The bed frame is reinforced to make it more robust and to afford extra heavy materials.

Great cutting capacity:

• Handwheel operated mechanical feed, allowing a smooth effortless scrolling.
• Easy regulation of the cutting height with a very effective and safe locking system.
• Lasting durability, as it is built on a rugged monobloc chassis, and easy to move, as it is featured with four lockable wheels.
• Transmission by belts, providing a smooth and quiet operation and a high cutting accuracy.
• The diamond blade is cooled with water pumped from the tub or directly from the water mains.
• Large galvanized steel water tub, able to hold up to 87 litres (50 gal.), removable for easy cleaning.
• Long-life sealed bearings specially designed to work in a wet working environment.
• All the electronic parts comply with the different applicable European norms and regulations.
• Maximum cutting length up to 844 mm (33.2”).
• Maximum cutting depth up to 420 mm (16.5”).

La entrada Magnum 1000 aparece primero en Sima.

The blocks saw MAGNUM 700 is rugged and powerful. It provides a high performance in cutting large-sized blocks of:

• poroton
• pre-cast concrete
• gasbeton
• lime / sand stone and many other construction materials, always using the blade that better suits the material to cut

There are two versions available: the 5.5 Kw (7,5 HP) for Ø700 mm (27”) blades and the 7 Kw (10 HP) for Ø1000 mm (39”) blades.

The MAGNUM includes such improvements as:
1. A new star-delta starter to reduce the amperage intake on start.

• When the start button is pushed, the motor gets started connecting the coils in series (delta mode), making the machine to work at just 80% of the total motor power.
• After 10 seconds, it will automatically switch to full power by connecting the coils in star mode.
• The red button will stop the machine in case of emergency.

2. Heavy duty water pump with high flow of up to 40 litres (10.5 gal.) per minute.
3. The bed frame is reinforced to make it more robust and to afford extra heavy materials.

Great cutting capacity:

• Handwheel operated mechanical feed, allowing a smooth effortless scrolling.
• Easy regulation of the cutting height with a very effective and safe locking system.
• Lasting durability, as it is built on a rugged monobloc chassis, and easy to move, as it is featured with four lockable wheels.
• Transmission by belts, providing a smooth and quiet operation and a high cutting accuracy.
• The diamond blade is cooled with water pumped from the tub or directly from the water mains.
• Large galvanized steel water tub, able to hold up to 87 litres (50 gal.), removable for easy cleaning.
• Long-life sealed bearings specially designed to work in a wet working environment.
• All the electronic parts comply with the different applicable European norms and regulations.
• Maximum cutting length up to 844 mm (33.2”).
• Maximum cutting depth up to 420 mm (16.5”).

nbsp;

La entrada Magnum 700 aparece primero en Sima.

They are prepared to cut any kind of blocks, such as pre-cast concrete, poroton, gasbeton or terracotta, but also for many other construction materials:

• bricks
• terrazzo
• limestone
• sandstone
• kerbstones.

Made to last: aluminium body and galvanized steel water tub, providing higher resistance to oxidation.

The BALI 700 series can use:

• Ø600
• Ø650
• Ø700 mm blades (24”, 25” and 27”), delivering up to 270 mm deep cuts in one pass.

The BALI 700 series deliver a lighter and portable choice for large blocks cutting. They are available both in three-phase and single-phase versions, allowing these last ones their connection to a standard power supply.

The versatile and rugged block cutter:

• Its reduced size makes it easy to store.
• Anodized extruded aluminium body, durable and lighter for transportation and to move the machine at the job site.
• Galvanized steel basin to prevent oxidation.
• Deep cutting, ranging from 20 cm (7.8”) in BALI 500 to 35 cm. (14”) in BALI 700.
• The head can be easily adjusted in height to adapt to the different cutting depths needed.
• Low vibrations and extended blade performance when cutting, due to its robustness.
• Excellent machine for cutting the most common sizes of blocks.

La entrada BALI 700 Mekano aparece primero en Sima.

THE PERFECT SOLUTION FOR INDOORS CUTTING

Antidust System

• Adaptable to any domestic vacuum cleaner with wáter filter.
• Vacuum cleaner not inluded in the machine Price.

Competitive Advantages

• Clean cut clear of 95% of the dust raised by the cutting.
• Can be used indoors even in furbished apartments.
• Quick and clean

THE MOST VERSATILE MACHINE IN THE SEGMENT

Special cuts: 45º, Windows,drip grooves and Slots

The swinging head combines with the bridge allowes perfect slots or Windows with a high quality finishing and without needing to use other tools.

Anti-Turn Support Arms

• Extendable arms for larger slabs
  Can be used while the machines rests on easels or on the floor
  Sliding Anti-Turn self lockers

La entrada ELITE aparece primero en Sima.

• from 700 mm (27.5”) cutting lengh to 1000 mm (39.3”)
• and a different cutting depth upon the use of a Ø200 mm (8”) or a Ø230 / Ø250 mm (9” / 10”) diamond blade adjusting the head height.

It is both, rugged and lightweight, as it is built on an aluminium frame and other rust-free materials. The cut is always thin and accurate.

The PERLANATO range is versatile, practical, highly performant and durable. They are perfect for cutting large slabs of hard porcelanic gres. All models have folding legs, and wheels are optionally available. Also as an option, they can be complemented with a side support with two clamps to lock the piece to the bench, for a more precise cut.

Efficient solutions:

• The PERLANATO range offers fast, reliable and efficient solutions, performing the two basic functions that the tile fitter needs on the work site: a 90º and 45º fine cut.
• The combination of its 1.5 Hp engine and the blade diameter (up to 250 mm / 10”), allows cutting all kind of materials up to 63 mm (2.4”) high:

1. hard tiles
2. terrazzo
3. terracotta brick
4. marble
5. gres, etc.

• All PERLANATO models are delivered with a tile cutting diamond blade included.
• The water supply hose pipe and wires are placed and lock so they never disturb the cutting field, but maintaining the necessary flexibility.
• As in all SIMA cutting tables, the locknuts that fix the blade guard to the head are tied to the guard, to avoid being lost.

La entrada PERLANATO 200 700 aparece primero en Sima.

They are prepared to cut any kind of blocks, such as pre-cast concrete, poroton, gasbeton or terracotta, but also for many other construction materials:

• bricks
• terrazzo
• limestone
• sandstone
• kerbstones.

Made to last: aluminium body and galvanized steel water tub, providing higher resistance to oxidation.

The BALI 500 series can use:

• Ø400
• Ø450
• Ø500 mm blades (16”, 18” and 20”), delivering up to 200 mm (7.8”) deep cuts in one pass.

The versatile and rugged block cutter:

• Its reduced size makes it easy to store.
• Anodized extruded aluminium body, durable and lighter for transportation and to move the machine at the job site.
• Galvanized steel basin to prevent oxidation.
• Deep cutting, ranging from 20 cm (7.8”) in BALI 500 to 35 cm. (14”) in BALI 700.
• The head can be easily adjusted in height to adapt to the different cutting depths needed.
• Low vibrations and extended blade performance when cutting, due to its robustness.
• Excellent machine for cutting the most common sizes of blocks.

La entrada BALI 500 Mekano aparece primero en Sima.

• bricks
• tiles
• kerbstones
• granite
• marble
• roof tiles, etc.

They offer top performance at the job site, cutting pieces up to 650 mm (25”) long.

The models DAKAR Mekano and DAKAR 400 Mekano have removable legs, but they can be optionally fitted with folding legs and transport wheels.

The DAKAR Mekano 45 shares the capacities and cutting accuracy of all DAKAR models, but it adds
the possibility of performing 45º bevel cuts, as well as to swinging the cutting head to the desired depth of cutting. Extremely versatile, its cutting length can be modified as well, by moving the head arm alongside the frame, to best adapt to the cutting distance

It is 90% made of stainless materials. The remaining 10% is coated with an anti-rust epoxy-polyester paint. The legs and head are removable making it easier to transport and move the machine on site.

Therefore, it is very easy to handle, facilitating the operator task and reducing the operation time.

90º and 45º cuts in large size pieces:

• Excellent value for money.
• Available in single-phase versions (3 Hp) and three-phase versions (4 Hp), to match every need.
• Adjustable height (DAKAR MK 45) to allow cutting different thickness using the appropriate blade.
• Maximum cutting depth is 75 mm (3”) for Ø300 mm (12”) blade and 100 mm (4”) for Ø350 blade (14”).
• All DAKAR models are supplied with a diamond blade included

La entrada DAKAR MEKANO aparece primero en Sima.

• from 700 mm (27.5”) cutting lengh to 1000 mm (39.3”)
• and a different cutting depth upon the use of a Ø200 mm (8”) or a Ø230 / Ø250 mm (9” / 10”) diamond blade adjusting the head height.

It is both, rugged and lightweight, as it is built on an aluminium frame and other rust-free materials. The cut is always thin and accurate.

The PERLANATO range is versatile, practical, highly performant and durable. They are perfect for cutting large slabs of hard porcelanic gres. All models have folding legs, and wheels are optionally available. Also as an option, they can be complemented with a side support with two clamps to lock the piece to the bench, for a more precise cut.

Efficient solutions:

• The PERLANATO range offers fast, reliable and efficient solutions, performing the two basic functions that the tile fitter needs on the work site: a 90º and 45º fine cut.
• The combination of its 1.5 Hp engine and the blade diameter (up to 250 mm / 10”), allows cutting all kind of materials up to 63 mm (2.4”) high:

1. hard tiles
2. terrazzo
3. terracotta brick
4. marble
5. gres, etc.

• All PERLANATO models are delivered with a tile cutting diamond blade included.
• The water supply hose pipe and wires are placed and lock so they never disturb the cutting field, but maintaining the necessary flexibility.
• As in all SIMA cutting tables, the locknuts that fix the blade guard to the head are tied to the guard, to avoid being lost.

La entrada PERLANATO 200 1000 aparece primero en Sima.