The blocks saw MAGNUM 1000 is rugged and powerful. It provides a high performance in cutting large-sized blocks of:

• poroton
• pre-cast concrete
• gasbeton
• lime / sand stone and many other construction materials, always using the blade that better suits the material to cut.

There are two versions available: the 5.5 Kw (7,5 HP) for Ø700 mm (27”) blades and the 7 Kw (10 HP) for Ø1000 mm (39”) blades.

The MAGNUM  includes such improvements as:
1. A new star-delta starter to reduce the amperage intake on start.

• When the start button is pushed, the motor gets started connecting the coils in series (delta mode), making the machine to work at just 80% of the total motor power.
• After 10 seconds, it will automatically switch to full power by connecting the coils in star mode.
• The red button will stop the machine in case of emergency.

2. Heavy duty water pump with high flow of up to 40 litres (10.5 gal.) per minute.
3. The bed frame is reinforced to make it more robust and to afford extra heavy materials.

Great cutting capacity:

• Handwheel operated mechanical feed, allowing a smooth effortless scrolling.
• Easy regulation of the cutting height with a very effective and safe locking system.
• Lasting durability, as it is built on a rugged monobloc chassis, and easy to move, as it is featured with four lockable wheels.
• Transmission by belts, providing a smooth and quiet operation and a high cutting accuracy.
• The diamond blade is cooled with water pumped from the tub or directly from the water mains.
• Large galvanized steel water tub, able to hold up to 87 litres (50 gal.), removable for easy cleaning.
• Long-life sealed bearings specially designed to work in a wet working environment.
• All the electronic parts comply with the different applicable European norms and regulations.
• Maximum cutting length up to 844 mm (33.2”).
• Maximum cutting depth up to 420 mm (16.5”).

La entrada Magnum 1000 aparece primero en Sima.

The blocks saw MAGNUM 700 is rugged and powerful. It provides a high performance in cutting large-sized blocks of:

• poroton
• pre-cast concrete
• gasbeton
• lime / sand stone and many other construction materials, always using the blade that better suits the material to cut

There are two versions available: the 5.5 Kw (7,5 HP) for Ø700 mm (27”) blades and the 7 Kw (10 HP) for Ø1000 mm (39”) blades.

The MAGNUM includes such improvements as:
1. A new star-delta starter to reduce the amperage intake on start.

• When the start button is pushed, the motor gets started connecting the coils in series (delta mode), making the machine to work at just 80% of the total motor power.
• After 10 seconds, it will automatically switch to full power by connecting the coils in star mode.
• The red button will stop the machine in case of emergency.

2. Heavy duty water pump with high flow of up to 40 litres (10.5 gal.) per minute.
3. The bed frame is reinforced to make it more robust and to afford extra heavy materials.

Great cutting capacity:

• Handwheel operated mechanical feed, allowing a smooth effortless scrolling.
• Easy regulation of the cutting height with a very effective and safe locking system.
• Lasting durability, as it is built on a rugged monobloc chassis, and easy to move, as it is featured with four lockable wheels.
• Transmission by belts, providing a smooth and quiet operation and a high cutting accuracy.
• The diamond blade is cooled with water pumped from the tub or directly from the water mains.
• Large galvanized steel water tub, able to hold up to 87 litres (50 gal.), removable for easy cleaning.
• Long-life sealed bearings specially designed to work in a wet working environment.
• All the electronic parts comply with the different applicable European norms and regulations.
• Maximum cutting length up to 844 mm (33.2”).
• Maximum cutting depth up to 420 mm (16.5”).

nbsp;

La entrada Magnum 700 aparece primero en Sima.

They are prepared to cut any kind of blocks, such as pre-cast concrete, poroton, gasbeton or terracotta, but also for many other construction materials:

• bricks
• terrazzo
• limestone
• sandstone
• kerbstones.

Made to last: aluminium body and galvanized steel water tub, providing higher resistance to oxidation.

The BALI 700 series can use:

• Ø600
• Ø650
• Ø700 mm blades (24”, 25” and 27”), delivering up to 270 mm deep cuts in one pass.

The BALI 700 series deliver a lighter and portable choice for large blocks cutting. They are available both in three-phase and single-phase versions, allowing these last ones their connection to a standard power supply.

The versatile and rugged block cutter:

• Its reduced size makes it easy to store.
• Anodized extruded aluminium body, durable and lighter for transportation and to move the machine at the job site.
• Galvanized steel basin to prevent oxidation.
• Deep cutting, ranging from 20 cm (7.8”) in BALI 500 to 35 cm. (14”) in BALI 700.
• The head can be easily adjusted in height to adapt to the different cutting depths needed.
• Low vibrations and extended blade performance when cutting, due to its robustness.
• Excellent machine for cutting the most common sizes of blocks.

La entrada BALI 700 Mekano aparece primero en Sima.

They are prepared to cut any kind of blocks, such as pre-cast concrete, poroton, gasbeton or terracotta, but also for many other construction materials:

• bricks
• terrazzo
• limestone
• sandstone
• kerbstones.

Made to last: aluminium body and galvanized steel water tub, providing higher resistance to oxidation.

The BALI 500 series can use:

• Ø400
• Ø450
• Ø500 mm blades (16”, 18” and 20”), delivering up to 200 mm (7.8”) deep cuts in one pass.

The versatile and rugged block cutter:

• Its reduced size makes it easy to store.
• Anodized extruded aluminium body, durable and lighter for transportation and to move the machine at the job site.
• Galvanized steel basin to prevent oxidation.
• Deep cutting, ranging from 20 cm (7.8”) in BALI 500 to 35 cm. (14”) in BALI 700.
• The head can be easily adjusted in height to adapt to the different cutting depths needed.
• Low vibrations and extended blade performance when cutting, due to its robustness.
• Excellent machine for cutting the most common sizes of blocks.

La entrada BALI 500 Mekano aparece primero en Sima.